All Pullers
Logo Available for Sale
Test Product #3
HP6500 “BOSS HOG” HYDRASTATIC PULLER
Optional Equipment
- Hydraulic Tool Circuit runs light duty tools such as pump, 10 GPM pump
- Hydraulic Rear Capstan – rear mounted on left side provides 90-100 FPM, 1,000 lbs. pull; solenoid controlled with directional switch
- Outriggers – hydraulically operated rear stabilizers
- Feeder Tubes – allow storage of long and short feeders used in underground placement operations
- Hydraulic Hose/Reel – rear fender mounted retractable reel/hose
- Beacon Light – fixed or telescopic pole mounting strobe light
- Urethane Drive Rollers advanced friction material for extra durability
- The optional Levelwind LW3 – semi-automatic, solenoid controlled for level winding onto the drum.
HYDRA 985 “THE HYDRA HOG”
Product Features:
The Hydra 985 develops whatever pull is necessary to overcome the resistance on the line. Pulls up to 24,000 lbs. can be developed to handle the most stubborn pulling situations. Line pull ratings are “bare drum” ratings measured with a dynamometer and achieved on a Model 8050 Break-Away Reel. Ratings will diminish or increase depending on the size reel used, its flange width, core diameter and amount of line on the reel. High coefficient of friction rollers assure best performance possible on any given reel.
HYDRA 135-C CONVERSION
General Specification
Power Steering Conversion:
Add this conversion to provide easy maneuvering to your unit. Includes rotary actuator activated idler wheel, complete controls and new drawbar cylinder with integrated holding valve. Now you can move your unit easily into those “tight” spots on the job.
Bearing Mandrel Rack Conversion:
Add this conversion to improve smoothness of payout and pulling operations while eliminating wear and tear on components. All metal-to-metal contact is eliminated with the use of Nylatron® mandrel bearings. Includes racks, bearings, bearing blocks and new reel mandrel.
See HYDRA 985. for complete specifications.
ODP 100PPS DRUM PULLER
The ODP 100 is a single drum puller capable of line pulls of up to 10,000 lbs. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and presettable line pull, and the operator controlled post style levelwind allows for even winding of rope. Disengaging the drive system allows for free wheel payout of the pulling rope with an integrated hydraulically controlled overspin brake.
ODP 20-4 DRUM PULLER
The ODP 20-4 is a four drum puller capable of line pull of 2,000 lbs on a single drum. Each drum can be engaged or disengaged for single or multiple drum pulling. An overspin brake with a hydraulic brake caliper is also included on each drum. The automatic diamond lead screw levelwind allows for even winding of rope on one drum at a time. Optional dual levelwind available.
ODP 200 DRUM PULLER
Trailer or truck mounted, this large transmission puller is capable of line pull of 20,000 lbs. Equipped with a John Deere Tier IV diesel engine, dual planetary drives and a rope capacity of 22,000 ft, this machine is ready for the large jobs.
ODP 30 DRUM PULLER
The ODP 30 is a single drum puller capable of line pull or tension of up to 3,000 lbs. Disengaging the drive system allows for free wheel payout of the pulling rope with an integrated hydraulically controlled overspin brake. The operator controlled post style levelwind allows for even winding of rope.
All unit functions are centrally located at the operators station. Engine gauges including tachometer, oil pressure, temp, fuel, and voltage are all in view. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and pre-settable line pull.
ODP 30-4 DRUM PULLER
The ODP 30-4 is a four drum puller capable of line pull of 3,000 lbs on a single drum. Each drum can be engaged or disengaged for single or multiple drum pulling. An overspin brake with a hydraulic actuator is also included on each drum. Operator controlled post style levelwind allows for even winding of rope.
All unit functions are centrally located at the operators station. Engine gauges including tachometer, oil pressure, temp, fuel, and voltage are all in view. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and pre-settable line pull.
ODP 40 DRUM PULLER
The ODP 40 is a single drum puller capable of line pull up to 4,000 lbs. Disengaging the drive system allows for free wheel payout of the pulling rope with an integrated hydraulically controlled overspin brake. The operator controlled post style levelwind allows for even winding of rope.
All unit functions are centrally located at the operators station. Engine gauges including tachometer, oil pressure, temp, fuel, and voltage are all in view. Pulling is controlled with an electric over hydraulic friction joystick allowing an infinite control of line speed and preset-able line pull.
ODP 40-4HRC DRUM PULLER
The ODP 40-4 HRC (High Rope Content) is a four drum puller capable of line pull of 4,000 lbs on a single drum. Each drum can be engaged or disengaged for single or multiple drum pulling. An overspin brake with a hydraulic actuator is also included on each drum. Operator controlled post style levelwind allows for even winding of rope.
All unit functions are centrally located at the operators station. Engine gauges including tachometer, oil pressure, temp, fuel, and voltage are all in view. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and presettable line pull.
ODP 60 DRUM PULLER
ODP 60 DRUM PULLER
The ODP 60 is a single drum puller capable of line pull or tension of up to 6,000 lbs. Disengaging the drive system allows for free wheel payout of the pulling rope with an integrated hydraulically controlled overspin brake. The operator controlled post style levelwind allows for even winding of rope.
All unit functions are centrally located at the operators station. Engine gauges including tachometer, oil pressure, temp, fuel, and voltage are all in view. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and presettable line pull.
ODP 100PPS DRUM PULLER
The ODP 100 is a single drum puller capable of line pulls of up to 10,000 lbs. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and presettable line pull, and the operator controlled post style levelwind allows for even winding of rope. Disengaging the drive system allows for free wheel payout of the pulling rope with an integrated hydraulically controlled overspin brake.
All unit functions are centrally located at the operators station. Engine and hydraulics system gauges including tachometer, oil pressure, temp, voltage, hydrastatic pressure, and overspin brake pressure are all in view, and a PowerView Engine Info Center allows the operator to monitor all functions of the power unit.