+1 (541)-354-1001

+1 (541)-354-1080


Hogg & Davis, Inc, PO Box 405, 3800 Eagle Loop, Odell, Oregon 97044 USA


The ODP 30-4 is a four drum puller capable of line pull of 3,000 lbs on a single drum. Each drum can be engaged or disengaged for single or multiple drum pulling. An overspin brake with a hydraulic actuator is also included on each drum. Operator-controlled post-style level wind allows for even winding of rope.

All unit functions are centrally located at the operator’s station. Engine gauges including a tachometer, oil pressure, temp, fuel, and voltage are all in view. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and pre-settable line pull.


  • 3,500 PSI maximum hydraulic pressure at full performance
  • 31,000 in-lb continuous torque rating
  • 37,000 in-lb intermittent torque rating
  • Infinitely variable line pull speed (full drum) from 0-4.0 mph

Drum Capacity

  • Four pulling reels with individual mechanical engagement at each reel
  • Reel is 44” diameter, 27” between flanges with a 12” core
  • The capacity of 15,000 ft per reel of .5 inch or 10,000 ft per reel of .625
  • Stainless steel overspin brakes with hydraulic calipers
  • Reel shaft mounted on pillow block and flange bearings
  • Hydraulic post-style level wind (2) rear of the trailer. (4) Optional

Hydraulic Reel Drive System

  • Drive system with spring-applied hydraulic release holding brake rated at 150% of rated machine torque
  • Breaking system applies automatically in event of pressure loss.
  • Manual holding brake control
  • Variable displacement hydraulic pump with electric variable speed control
  • Hydraulic oil cooler
  • 31-gallon hydraulic reservoir with oil level sight glass


  • Yanmar 4TNV88-DSA 47.5 hp water-cooled diesel
  • 23-gallon fuel tank with gauge
  • Lockable steel battery box
  • Direct Mount Hydraulic Pump

Unit Dimensions

  • Length: 16’-6” (198″)
  • Width: 8’-0” (96″)
  • Height (shield Up): 8’-1-1/2” (97.5″)
  • Height (Shield Down): 6’-9” (83″)
  • Weight (with rope and fluids): 10,720 lbs.
  • Tongue weight: 940 lbs. (approx.)

Control Console

  • The control console is positioned in the center of the trailer tongue to provide optimum visibility and safety
  • Laser Engraved operators panel with Rowmark Lasermax to a depth of .003 inches
  • Hydraulic pressure gauge and Nominal line pull chart for line pull estimation
  • Friction joystick for take-up and payout functions
  • Payout lockout switch to prevent unintentional payout of rope or conductor
  • Adjustable line pull pressure control
  • Operator’s protection screen
  • Operator’s seat

Trailer & Undercarriage

  • Tandem axle with 7,000 lb capacity, spring leaf type with 12V electric brakes and breakaway switch
  • Breakaway chains ½” X 36” with hooks and premier #9 weldments
  • Tires meeting or exceeding the GAWR of unit
  • Lighting system in accordance with FMVSS 108
  • Conspicuity System in accordance with FMVSS 108
  • Heavy Duty crank-style tongue and rear trailer jacks
  • Frame is constructed of tubular steel, fully welded and gusseted
  • Heavy-duty gauge fenders with mud flaps
  • Unit is to be painted prior to assembly.
  • Blast with steel grit GM50, primed, baked, painted with two finish coats, and cured for 2 hours at 140 degrees
  • Paint shall be Sherwin Williams Genesis II


  • 15,000 feet of ½” Samson Tenex 12 Strand Rope
  • Four different colors
  • Average breaking strength of 11,800 lbs
  • 10,000 feet of 5/8” Samson Tenex 12 Strand Rope
  • Four different colors
  • Average breaking strength of 17,100 lbs