+1 (541)-354-1001

+1 (541)-354-1080


Hogg & Davis, Inc, PO Box 405, 3800 Eagle Loop, Odell, Oregon 97044 USA


The ODP 40-4 HRC (High Rope Content) is a four drum puller capable of line pull of 4,000 lbs on a single drum. Each drum can be engaged or disengaged for single or multiple drum pulling. An overspin brake with a hydraulic actuator is also included on each drum. Operator-controlled post-style level wind allows for even winding of rope.

All unit functions are centrally located at the operator’s station. Engine gauges including a tachometer, oil pressure, temp, fuel, and voltage are all in view. Pulling is controlled with an electric over hydraulic friction joystick allowing for infinite control of line speed and presettable line pull.


  • Continuous Linepull Rating: 4,000 lbs (Single Drum)
  • Continuous Torque Rating: 96,000 in-lb (Single Drum)
  • Infinitely Variable Speed from 0.0 – 4.0 mph

Drum Capacity

  • Rated Diameter: 48”
  • Width: 31”
  • Rated Rope Capacity: 15,000 feet (5/8” dia.)

Drive System

  • Yanmar 4TNV88C-DYEM Tier IV 45 HP Diesel Engine
  • Closed Loop Hydra-static Drive
  • Spring Applied, Hydraulic Release Drive Train Brake
  • Mechanical Clutch Engagement on Each Drum
  • Freewheel Disconnect on Each Drum
  • 30” Dia. Hydraulic Overspin Brake on Each Drum

Unit Dimensions

  • Length: 22’ 4”
  • Width: 8’6”
  • Height (shield Up): 9’4-1/4”
  • Height (Shield Down): 8’1-3/4”
  • Weight (curb): 11,000 lbs

Trailer Data

  • Tandem 8,000 lb Leaf-Sprung Axles
  • 17,600 lb GVWR
  • Electric Trailer Brakes
  • (3) Drop-Leg Manual Leveling Jacks
  • (4) R17.5 – 16 Ply Rated Tires
  • Full Coverage Fenders With Mudflaps
  • D.O.T. LED trailer Lighting with 7-Wire Connector

General Features

  • 19 Gallon Fuel Capacity
  • 29.5 Gallon Hydraulic Oil Capacity
  • Four (4) Hydraulic Boom Levelwinds
  • Lockable Steel Battery Box
  • Metal grit blasted, primed, baked. After prep, 2 finish coats of white Sherwin Williams Genesis II paint is applied, and oven cured for 2 hours at 140º F