The Hogg and Davis, Inc., Break-Away Reel was designed to recover overhead or underground cable, conductor or strand which is to be scrapped.
- No demurrage costs because company reels are no longer being used to ship scrap cable.
- Eliminates the mess and cost of chopping the cable is made into easily handled coils.
- No collapsed reels because the BREAK-AWAY REEL is designed to with stand 50,000 lbs. line pull.
- No scrap penalties because the “Scrappers” do not have to handle messy chopped cable or additional reels.
- Reduce freight costs because nothing is shipped but scrap.
CABLE SHEAVE 424L
The Hogg & Davis, Inc. Model 424 Cable Sheave is proving itself to be the answer to many problems in underground cable pulling. The large 24-inch diameter wheel can be used with standard size cables without the fear of crimping or distortion.
The lightweight aluminum wheel can be used with lead or synthetic sheath cable with no worry of scarring or marking the cable. The 360- degree swivel hook provides a strong anchor and allows the sheave to stay in line with the cable eliminating the problem of the cable “walking out” of the groove.
CABLE SHEAVE 636
The Hogg and Davis, Inc., Model 636 Cable Sheave is a proven solution to many underground cable-pulling problems. The extra large 36-inch sheave can be used with most cables presently on the market – small to large – without fear of distortion or crimping.
The large, smooth groove virtually eliminates scarring or marring of synthetic or lead sheath cables. A 360-degree swivel hook provides a strong anchor and allows the sheave to stay in line with the cable, eliminating the problem of the cable “walking out” of the groove – even when multiple or bundled conductors are being pulled.
EXPANDABLE PAYOUT REEL
This No. 81620 Expandable Payout Reel is designed to work in any position. Made of heat-treated aluminum, these reels can be used singly, or mounted in any combination arrangement on a common stand to pay out multiple coils.
Loading is easily accomplished by folding the spring-loaded fingers located on outside of reel in position. The fingers will only fold in correct direction for use. The unique self-leveling scissors linkage is used to expand or contract the reel circumference to fit wire coils from 16” to 20” in inside diameter, up to 10” wide.
PM10 POLE MUZZLE
Rigged and ready to roll, the PM 10 Pole Muzzle is secured to the pole and facilitates rigging back to the trailer for a solid towing package. The snubbing and cinch chains provide solid capture of the pole. The cinch chain is designed to be used in conjunction with a binding chain back to the trailer. For additional security, the strong-backed PM 10 is slotted for a bolt through the pole’s gain hole.
POLY-PIC LIFTING SLING
The 62-4 Poly-Pic System provides the method of handling coiled plastic pipe that eliminates pipe damage. The Poly-Pic System eliminates the use of lift truck forks, pry bars, and hands to separate stacked coils. With a unique design, the Poly-Pic sling grips coils around its circumference. Wide nylon webbing positively grips the coil by forming itself to the wraps of the coil. A positive locking ratchet buckle provides all the power needed for the grip without scratching or marring pipe.
Four (4) vertical legs of the sling insure an even horizontal lift for placement on pallet, truck bed or carousel. The Poly-Pic System can be used with a forklift or crane hook and offers a safer and more efficient method of handling your material.
The tremendous crushing forces generated by synthetic rope under strain pose no problem for the Hogg and Davis crush-proof rope reel. Built to withstand the massive pressures that destroy ordinary cable reels, the crush-proof rope reel is constructed for the most rigorous applications and designed to last year after year.
Ordinary reels can’t hold the enormous pressure generated by wound synthetic rope. As the rope is wound onto a reel, it becomes stretched, but, after winding, the rope attempts to retract to its former length. This retraction or pulling creates immense pressures of over 100,000 PSI which can readily crushes ordinary reels, leaving twisted masses of rope tangled around a useless, demolished reel.
RS & SRS 8000
If you already have a flatbed truck or trailer in your fleet and would like to have a multi-reel capacity unit for payout operations — the answer is Hogg and Davis, Inc. SRS8000 reel stand. Also available without swivel base; the RS8000.
The SRS8000 is mounted on a turntable bearing base with locked position every 3 1/2 degrees. This allows the SRS8000 to be positioned at the right pay-out angle without having to move the truck or trailer. When not in use, the SRS8000 can be easily removed from the bed to free the vehicle for other tasks.
SAFETY POLE TONGS
Long recognized as the “standard” in the industry, Hogg & Davis, inc. Safety Pole Tongs have proven themselves time and again in the areas of safety, durability and economy. Timbers or poles are held securely by the triple saw tooth arrangement and cannot slip while under load. Nylatron® pulleys ensure smooth operation of the trip line, which enables the crane, or hoist operator to load and unload poles without putting people in the “danger zone.” Utility companies have increased their pole handling efficiencies by as much as 50% with less labor. Put them to work in your company. Two sizes available to handle most sizes of poles.
These are the advantages of the US-6 and US-20 universal bed mount sheaves from Hogg and Davis, Inc. Both feature tough NYLATRON® sheave wheels to give maintenance free reliability and increase winch life. The center sheave housings rotate 360° for any angle underground or overhead pulls and the slotted center housing is easily removed so hooks, clevises, swivels and other line hardware can pass through without dismantling of line.