HYDRA 135-C CONVERSION
General Specification
Power Steering Conversion:
Add this conversion to provide easy maneuvering to your unit. Includes rotary actuator activated idler wheel, complete controls and new drawbar cylinder with integrated holding valve. Now you can move your unit easily into those “tight” spots on the job.
Bearing Mandrel Rack Conversion:
Add this conversion to improve smoothness of payout and pulling operations while eliminating wear and tear on components. All metal-to-metal contact is eliminated with the use of Nylatron® mandrel bearings. Includes racks, bearings, bearing blocks and new reel mandrel.
See HYDRA 985. for complete specifications.
HP6500 “BOSS HOG” HYDRASTATIC PULLER
Optional Equipment
- Hydraulic Tool Circuit runs light duty tools such as pump, 10 GPM pump
- Hydraulic Rear Capstan – rear mounted on left side provides 90-100 FPM, 1,000 lbs. pull; solenoid controlled with directional switch
- Outriggers – hydraulically operated rear stabilizers
- Feeder Tubes – allow storage of long and short feeders used in underground placement operations
- Hydraulic Hose/Reel – rear fender mounted retractable reel/hose
- Beacon Light – fixed or telescopic pole mounting strobe light
- Urethane Drive Rollers advanced friction material for extra durability
- The optional Levelwind LW3 – semi-automatic, solenoid controlled for level winding onto the drum.
CRP140 MULTIPURPOSE DOLLY
General Specification
- 14,000 GVWR Tandem Axle
- Slipper Spring Suspension
- 12v Electric Brake
- Height Adjustable Pintle Eye
- Drop-leg Swing-away Jack
- Cargo Area: 108″x64″x15″ deep
- 4 D-rings Inside Cargo Area
- 7.5 cu. ft. Lockable Storage Box
- 1 pr. Removable Reel Stanchions w/ mandrel, 2 cones and 2 collars
- Pole Carrying Capabilities
- FMVSS 108 Compliance
- Heat Shrink Electrical Connectors
- Baked, Polyurethane Paint
H135PP Power Reel Dolly
General Specification
Reel Capacity: Single, 108″ DIAx56″ Wide
Axle: Stub Spindle, 10 hole single wheel hub
Brakes: 16×5 Air Brakes w/ABS (STD), 16×5 12v Electric (Optional)
Tires: 14/80R20 18PR (STD) 18,000 GAWR
Engine: Air-Cooled, 9HP, 12V Starter, Flywheel alternator
Hydraulics: Open-center, 4 GPM, 2000 PSI, 10 gal. Reservoir, Wire mesh suction filter, four section valve with pressure relief.
Options
- Steer-Go
- Levelwind
- Hydraulic Retriever Arm
- Hydraulic Outriggers